Marine

Extreme weather and rough seas are all par for the course for Kawasaki’s hydraulic components and machines in the marine industry. Each has been designed to work hard around the clock in hazardous weather. So, whatever the conditions you can rely on Kawasaki’s components to give you the highest levels of reliability, efficiency and performance.

K3VG

The K3VG series are swash-plate type axial piston pumps which give excellent performance in high flow industrial applications in a compact and cost-effective package.

> 63 to 280cc displacements available
> 350 bar continuous pressure rating
> Common suction port
> Extensive range of highly responsive control options

K3VL

The K3VL series swash plate type axial piston pumps are designed to satisfy a variety of construction and off-highway applications where a medium to high pressure variable displacement pump is required.

> 28 to 200cc displacements
> 320 bar continuous pressure rating
> Load sensing, torque limiting and electronic displacement control
> Integral impellor pump available on 200cc unit
> *NEW* ATEX option now available!

 

M3X/M3B

The M3X and M3B series are swash plate type axial piston motors in fixed (M3X) and variable (M3B) displacement versions. They are used extensively in mobile crusher drives, cranes and drill rigs.

> 200, 280, 530 and 800cc displacements
> 300 bar continuous pressure rating
> Constant horsepower control option
> Available with parking brake

HMC Motors – Dual Displacement

The HMC series variable displacement models have two pre-set displacements which can be chosen
from a wide range to suit specific application requirements. These motors are also available in a
continuously variable version using either hydro-mechanical or electro-hydraulic control methods.

> 492 to 5,326cc displacements in 7 frame sizes
> 250 bar continuous pressure rating
> Dynamic displacement change under load
> Freewheel option available
> Constant horsepower control option

HMB Motors – Fixed Displacement

Our fixed displacement Staffa HMB radial piston motors have a rugged, reliable and proven design that incorporates high efficiency with good breakout torque and smooth running capability.

> 188 to 8,000cc displacements in 11 frame sizes.
> 250 bar continuous pressure rating.
> 300 bar intermittent pressure.
> High volumetric and mechanical efficiency.
> Unique hydrostatic balancing provides minimum wear and extended life.

HMF Motors – Triple Displacement

Our HMF radial piston motors have three pre-set displacements which can be selected from a wide range to suit specific application requirements. The motor was originally designed to allow 2 standard operating modes, and a 3rd ‘freewheel mode’ in case of emergency release – but the HMF series can equally just be used as a 3 speed motor.  The motor displacement can be changed with ease while the motor is running and under load.

> 3 displacement modes
> 1,475 to 5,326 cc displacements in 4 frame sizes.
> Freewheel option available
> Dynamic displacement change
> Speed sensing options