Truck Mounted Cranes
K-Axle
The K-Axle is the all new high speed electric motor and pump unit for construction vehicles. A scalable 50cc single or tandem unit able to operate at speeds of up to 5,000 rpm
- Compact size
- High efficiency
- Highly flexible
KDRDE5K/KWE5K
The KDRDE5K and KWE5K series valves are proportional pressure-reducing and directional control valves of cartridge type. Available in 12 and 24 VDC versions, they can be used in combination to provide various compact control solutions for agricultural and mobile machinery.
- 90 bar supply pressure
- 10 l/min and 16 l/min flow rates
- Common cavity for KDRDE5K and KWE5K
- Excellent hysteresis
KMP
The KMP series main control valves provide proportional control of agricultural and mobile machinery. They give precise control with pressure compensation and the internal pilot system eliminates the need for external pilot pressure sources.
- 80 l/min inlet flow
- 310 bar pressure rating
- Electro-hydraulic actuation
- Manual override levers for emergency
KLSV
The KLSV is a series of flow-sharing, load-sensing main control valves for multifunction construction machinery. Their low hysteresis and excellent pressure drop characteristics provide superior performance and efficiency.
- Post-compensated, flow-sharing design
- Hydraulic pilot and electro-hydraulic actuation
- 400 bar continuous pressure rating
- Special versions for wheel loaders, midi excavators and skid steer loaders
- Three sizes with sectional flow rates of 180, 250 and 400 l/min
K3VL
The K3VL series swash plate type axial piston pumps are designed to satisfy a variety of construction and off-highway applications where a medium to high pressure variable displacement pump is required.
- 28 to 200cc displacements
- 320 bar continuous pressure rating
- Load sensing, torque limiting and electronic displacement control
- Integral impellor pump available on 200cc unit
K3VLS
Kawasaki’s medium duty pump, the K3VLS, has been developed for machines and equipment that use a load sensing control system and/or electric displacement control systems. Its launch follows extensive research and development as our engineers combined efficiency with simplicity to deliver the most technologically advanced pump on the market.
- 50, 65, 85, 105, 125 & 150cc displacements
- 280 bar continuous pressure rating
- 350 bar maximum pressure rating
- Load sensing, torque limiting, power shift and electronic displacement controls
M7V
The M7V series is a high speed variable displacement swash plate type axial piston motor. It is suitable for, but not limited to, use in hydrostatic transmissions, drill rigs and crane winch systems.
- 85, 112, 160 and 212cc displacements
- 400 bar continuous pressure rating
- Electronic and hydraulic displacement control
- Fixed displacement version available
- Compact design