Forklift Trucks
![forklifts trucks labelled diagram](https://www.kawasakihydraulics.com/app/uploads/2019/10/layout_I-18_Forklift_Trucks.jpg)
![](https://www.kawasakihydraulics.com/app/uploads/2019/10/KLSV-v2.jpg)
KLSV
The KLSV is a series of flow-sharing, load-sensing main control valves for multifunction construction machinery. Their low hysteresis and excellent pressure drop characteristics provide superior performance and efficiency.
- Post-compensated, flow-sharing design
- Hydraulic pilot and electro-hydraulic actuation
- 400 bar continuous pressure rating
- Special versions for wheel loaders, midi excavators and skid steer loaders
- Three sizes with sectional flow rates of 180, 250 and 400 l/min
![](https://www.kawasakihydraulics.com/app/uploads/2019/10/K3VL112-140.jpg)
K3VL
The K3VL series swash plate type axial piston pumps are designed to satisfy a variety of construction and off-highway applications where a medium to high pressure variable displacement pump is required.
- 28 to 200cc displacements
- 320 bar continuous pressure rating
- Load sensing, torque limiting and electronic displacement control
- Integral impellor pump available on 200cc unit
![](https://www.kawasakihydraulics.com/app/uploads/2019/10/K3VLS105.jpg)
K3VLS
Kawasaki’s medium duty pump, the K3VLS, has been developed for machines and equipment that use a load sensing control system and/or electric displacement control systems. Its launch follows extensive research and development as our engineers combined efficiency with simplicity to deliver the most technologically advanced pump on the market.
- 50, 65, 85, 105, 125 & 150cc displacements
- 280 bar continuous pressure rating
- 350 bar maximum pressure rating
- Load sensing, torque limiting, power shift and electronic displacement controls
![](https://www.kawasakihydraulics.com/app/uploads/2019/10/K8V.jpg)
K8V
The K8V series is Kawasaki’s closed loop pump with excellent controllability and superior efficiency. It is used in hydrostatic transmissions ona variety of off-highway machinery.
- 71, 90 and 125cc displacements
- 400 bar rated pressure
- Electronic and hydraulic displacement control
- Through drive and tandem versions available
![](https://www.kawasakihydraulics.com/app/uploads/2019/10/M7V.jpg)
M7V
The M7V series is a high speed variable displacement swash plate type axial piston motor. It is suitable for, but not limited to, use in hydrostatic transmissions, drill rigs and crane winch systems.
- 85, 112, 160 and 212cc displacements
- 400 bar continuous pressure rating
- Electronic and hydraulic displacement control
- Fixed displacement version available
- Compact design